yamada-casting,YAMADA,cast,ironworker,metal mold casting,aluminum,trial production,Aluminum casting,Cooking rice pot,Pure aluminum,Insert casting,Production of aluminum alloy casting parts,Processing of aluminum alloy casting parts,japan,kagawa,marugame
Rich Experience, Reliable Products, and the Challenge to Create



I'm migrating from the foundation in 1918 in about 100 and am even producing processing from mint consistently.
Production and processing of an aluminum alloy cast are being performed mainly at present.




It's being cast in gravity metallic mold mint and skin and a good aluminum cast of the dimensional accuracy are being produced.
in particular, aluminum and stainless material, the insertion mint with which you can unite is being done with a customer.



cast and machined products

I have the good record of performance delivered to the various fields including the exterior relation, industrial equipment and food-related equipment.

What's New


One improved Corona Cleaner F was donated.

At the end of December 2020, we donated a unit of the improved Corona Cleaner F to the Matsukawa Neurological Clinic of the Shozen-kai Medical Corporation in Kobe to help prevent the spread of the new coronavirus infection. Although the new coronavirus infection is spreading worldwide, we sincerely hope that the situation will end as soon as possible and that people will be able to return to a peaceful life, and we will continue to do what we can to help.

Notice of New Year’s Holiday

We would like to inform you that our company will be closed for the New Year holidays as follows. We apologize for any inconvenience this may cause and thank you in advance for your understanding.

<Year-End and New Year holidays>
December 26, 2020 (SAT) – January 3, 2021 (SUN)

<For inquiries>
During the holiday period, we will be accepting inquiries by e-mail and fax, but we will respond to your inquiries sequentially from January 3 (MON).

Ten units of the improved Corona Cleaner F were donated to Marugame City.

On August 18, 2020, we donated 10 units of the improved Corona Cleaner F to Marugame City to support the prevention of the spread of the new coronavirus infection. The Corona Cleaner F was developed by Dr. Akiyoshi, Associate Professor, Radiation Research Center, Research Promotion Organization, Osaka Prefecture University. It is a device designed to inactivate viruses contained in airborne aerosols using a tungsten trioxide photocatalyst that responds to visible light with high efficiency. Based on the Corona Cleaner F, we made a prototype of an improved product that can collect a wide range of aerosols by using our 3D printer under the guidance of Dr. Akiyoshi. As shown in the image below, we have confirmed that the improved product can collect a wide range of aerosols, and we plan to use it at contact points where many unspecified people visit and at places where ventilation is difficult. We sincerely hope that this situation will end as soon as possible and that people will be able to return to a peaceful life, and we will continue to do what we can to help. We will continue to contribute to the development of the community as a company rooted in the community by donating to local medical facilities as well.


Shikoku Shimbun, on August 22, 2020, 20th page

Adopted “New Export Power Consortium” in FY2020

On June 30, 2020, we were selected by Japan External Trade Organization (JETRO) for the FY2020 “Consortium of New Export Powerhouses” to support overseas expansion by experts.
This year, we plan to work toward overseas expansion, starting with Germany, with the support of JETRO.

Plastcontrol Germany and German-Japanese Society Bonn visited us

On February 3, 2020, Mr. Sabine Ganter-Richter, President of the German-Japanese Society Bonn, Mr. Marco Invernizzi, Mr. Norbert Sappelt of Plastcontrol, and Mr. Tadano, Chairman of the Japan-German Society Kagawa (Honorary Advisor of Tadano Co., Ltd.) visited us. The visit was realized through the intermediary of the Japan-Germany Society of Kagawa as part of the *GRANITE project of the Federal Republic of Germany to promote business exchange between Japan and Germany. On the day, the participants observed the production line of aluminum gravity mold casting and had a deep discussion about the products we can manufacture and our future business plan. We plan to promote the export of aluminum casting products from our company to overseas companies in the future.

*GRANITE Project
GRANITE (German Research Ambassadors Network for Industrial Technology Endeavors) is part of the research marketing campaign “The Future of Work” of the German Federal Ministry of Education and Research (BMBF). The project is carried out by the Fraunhofer Institute for Applied Information Technology and Lyogroup International. The aim of this project is to create a sustainable German-Japanese network for applied research and technology application, mainly in the field of IoT, and to promote joint research and development as well as technology transfer through networking between German and Japanese companies, researchers, and local governments.


New Year’s Greeting

Happy New Year to you all. We look forward to working with you again this year. Our company was founded in 1918, and we have reached four milestones: Taisho, Showa, Heisei, and Reiwa. We would like to express our sincere gratitude to our customers and all other people who have made it possible for us to move forward. We will continue to strive to be a company that is needed by our customers, and we would like to ask for your continued warm support.

copyright© yamada-casting.jp All Rights Reserved